Dealer Access

Information request

Contact us at 1-888-577-6274
or by filling out this short form.

Our brochures

Download our brochures to know more about the advantage of using our products.

User manuals

iGS-010 Discontinued
(143 Ko)

iGS-011
(306 Ko)

iGS-011L Discontinued
(122 Ko)

iGS-012
(315 Ko)

iGS-015 (Forthcoming)
(639 Ko)

iGS-016 (Forthcoming)
(1.24 Mo)

iGS-020 and iGS-020R Discontinued
(292 Ko)

iGS-021
(36 Ko)

iGS-030 and iGS-030R Discontinued
(269 Ko)

iGS-040 and iGS-040R Discontinued
(254 Ko)

iGS-061
(437 Ko)

iGS-100 2007 with iGS-50 Output box
(654 Ko)

iGS-100 2010 with iGS-25 and AC adapter
(654 Ko)

iGS-110 2006 with iGS-50 Output box
(321 Ko)

iGS-110 2010 with iGS-25 Output box and AC adapter
(380 Ko)

iGS-111
(2.23 Mo)

iGS-200 Discontinued
(585 Ko)

iGS-210 Discontinued
(604 Ko)

iGS-220 2007 with iGS-50
(680 Ko)

iGS-220 2010 with iGS-25 and adapter Ad1
(1.09 Mo)

iGS-220 U
(803 Ko)

iGS-221 2011
(1.67 Mo)

iGS-DCS
(167 Ko)

iGS-RG1
(347 Ko)

CAUTION

iGS-RG1

Adjusting the CO₂ release pressure with the black knob thus bringing the needle to point in the red zone on the dial does not increase the CO₂ flow rate. It may cause the regulator to leak CO₂ from the pressure release orifice under the regulator.

If CO₂ leaks through the orifice under the regulator, it is not faulty. Just turn the black knob counter clockwise to bring back the needle to point in the green zone, between 0.2 and 0.3 MPa on the dial. To increase the CO₂ flow rate in cubic feet per hour, add a second and even a third 20 lbs bottle or even use a 50 lbs bottle. Remember that a 20 lbs CO₂ bottle cannot release more than 14 cubic feet of CO₂ per hour.

iMS-100 Discontinued
(3.47 Mo)

iGS-LP-NG CO₂ generators Discontinued
(296 Ko)

ILS4-121, iLS4-121S, iLS4-241 and iLS4T External Timers
(1.12 Mo)

iLS4-120, iLS4-120S and iLS4-240 Discontinued
(252 Ko)

Developped by Numérique Technologies

Last updated on : February 22, 2012