Français »- Home
- |
- Products
- |
- Gardening Library
- Controlling Climate conditions
- Do plants need climate controllers?
- Temperature and Humidity: Winning Factors in the Garden
- Climate Controllers: Calibration for Indoor Gardening Success
- CO2: The Secret Ingredient for a Better Harvest
- Precise and Stable: CO2 Concentration in the Garden
- Safe and Effective CO2 Enrichment in the Garden
- Taking Advantage of CO2 Enrichment
- Automated Climate Control the Right Way
- Optimal Management of Lighting and Irrigation
- |
- Useful applications
- |
- Technical support
- |
- New products
- |
- The company
Information request
Contact us at 1-888-577-6274
or by filling out this short form.
Our brochures
Download our brochures to know more about the advantage of using our products.
Error codes
Most Common Controllers Error Codes
and their Meaning
|
iGS-061 |
|
|
Adu 1 |
CO2 sensor overflow (> 5,000 ppm): calibrate sensor[1] |
|
Adu 2 |
CO2 sensor calibration needed |
|
Adu 3 |
Recovered data: verify settings |
|
Err 3 |
CO2 sensor failure[2] |
|
Err 4 |
Temperature sensor failure2 |
|
Err 6 |
Automatic system recovery has failed2 |
|
Alr 3 |
Temperature < Low Temp Shut Off |
|
Alr 4 |
Temperature > High Temp Shut Off |
[1]. If the CO2 reading is wrong, you can recalibrate the CO2 sensor. See the procedure
[2]. Disconnect and restart your controller. If the problem lasts, reset the controller (see procedure). If the problem lasts, call PLUG'n'GROW at 1-888-577-6274 or chat with an agent at info@igrowing.ca
|
iGS-100 |
|
|
Err 1 |
CO2 sensor overflow (> 5,000 ppm): calibrate1 |
|
Err 2 |
CO2 sensor calibration needed |
|
Err 3 |
CO2 sensor failure |
|
iGS-110 |
|
|
Err 4 |
Temperature / Relative Humidity sensor failure2 |
|
iGS-200 |
|
|
Err 1 |
CO2 sensor overflow (> 5,000 ppm): calibrate1 |
|
Err 2 |
CO2 sensor calibration needed |
|
Err 3 |
CO2 sensor failure2 |
|
Err 4 |
Humidity sensor failure2 |
|
Err 5 |
Humidity alarm |
|
Err 6 |
< 2 hours power failure: make sure the clock in on time |
|
Err 7 |
2 to 36 hours power failure: make sure the clock in on time |
|
Err 8 |
> 36 hours power failure: enter current time |
|
iGS-210 |
|
|
Err 1 |
CO2 sensor overflow (> 5,000 ppm): calibrate1 |
|
Err 2 |
CO2 sensor calibration needed |
|
Err 3 |
CO2 sensor failure2 |
|
Err 4 |
Temperature sensor failure2 |
|
Err 5 |
Temperature alarm |
|
Err 6 |
< 2 hours power failure: make sure the clock in on time |
|
Err 7 |
2 to 36 hours power failure: make sure the clock in on time |
|
Err 8 |
> 36 hours power failure: enter current time |
|
iGS-220 |
|
|
Adu 1 |
CO2 sensor overflow (> 5,000 ppm): calibrate sensor1 |
|
Adu 2 |
CO2 sensor calibration needed |
|
Adu 3 |
Recovered data: verify settings |
|
Adu 6 |
< 2 hours power failure: make sure the clock is on time |
|
Adu 7 |
2 to 36 hours power failure: make sure the clock is on time |
|
Adu 8 |
> 36 hours power failure: enter current time |
|
Err 3 |
CO2 sensor failure2 |
|
Err 4 |
Temp./Relative Humidity sensor failure2 |
|
Err 6 |
Automatic system recovery has failed2 |
|
Alr 1 |
Relative Humidity < Low limit |
|
Alr 2 |
Relative Humidity > High limit |
|
Alr 3 |
Temperature < Low limit |
|
Alr 4 |
Temperature > High limit |
|
Alr 5 |
Emergency mode is activated[1] |
|
Alr 6 |
Cooling limit reached while dehumidifying3 |
[1]. Verify the alarms settings and limit values. Look at the user guide to better understand these functions.
|
If the problem lasts, call PLUG'n'GROW, toll free at 1-888-577-6274
or chat with an agent at info@igrowing.ca |
Last updated on : July 31, 2010
© 2008 Plug "N" Grow