iGS-030R Discontinued

Day and Night Relative Humidity Display Control with Ajustable Differential

Will be discontinued on May 31, 2010 or till supply lasts

For the same precise control over temperature, with the added functionality of relative humidity control, please see iGS-110 S

WARRANTY POLICY IMPLEMENTATION

As usual, upon appraisal from our technical support (888-577-6274) upon a call from the user or store and a Return Merchandise Authorization (RMA) issued to the store, the defective iGS-030 or iGS-030R may be:

1. Exchanged and upgraded to an iGS-110 S over the counter at a very discounted price. The warranty on the new iGS-110 S unit sold in this exchange-upgrade program will be for 3 years starting upon the date of the upgrade purchase.

2. Repaired if the owner chooses so: delays for the user to get the fully functional unit back in his hands, due to transportation back and forth, customs and repair shop delays may amount to many weeks and usually at least one month.

The owner of a defective iGS-030 or iGS-030R unit should call Plug'N'Grow’s free technical support line (888-577-6274) or visit his store to get the unit checked and inquire about getting an iGS-110 S for replacement at a widely discounted price.

Features

• Practical and simple to use horticultural humidistat
• With external sensor on 10 feet cable
• Relative humidity controller with display and day/night detection
• Relative humidity precise sensor: ±3.5% RH
• Can be set to operate misting, fogging, humidifying or dehumidifying equipment
• Adjustable day and night set points from 5 to 100% RH
• The ambient relative humidity is displayed
• Differential is adjustable from ±2.5% to ±12.5% RH
• 120 V, 15 A, 2 HP load capacity  
• CSA/UL compliant

Also available in iGS-030 version without external sensor.

Useful Tips

• Plug one 120 V humidifier or dehumidifier or exhaust fan up to 1,500 W in the iGS-030 power outlet;

or

• Multiply your dehumidifying capacity by plugging a sense cord from a switcher box like PLUG'n'GROW iLS4 in the iGS-030 outlet;

Control the humidity without losing CO₂

Plug a 120V power strip in the outlet of the PLUG'n'GROW humidity controller (iGS-030) and plug the ventilation equipment and the iLS120-OFF sense cord (to avoid CO₂ enrichment during ventilation) in the power strip. Plug the iLS120-OFF in a 120 V separate circuit and plug a CO₂ controller (iGS-061 or iGS-100) in the iLS120-OFF outlet and plug CO₂ enrichment device in CO₂ controller outlet.

For more information, contact us at 1-888-577-6274.

« Return to hygrostats