iGS-040R

Day and Night Cooling and Dehumidifying Display Control with Adjustable Differential

Features

• Cooling and dehumidifying controller with display and day/night detection
• With external sensor on 10 feet cable
• For exhaust and inlet fan, air conditioner, dehumidifier, heat exchanger
• Displays both temperature and relative humidity
• Adjustable day and night set points from 32 to 108°F (0 to 42°C) and from 5 to 100% RH
• Differential is adjustable from ±1.8 to ±9°F (±1 to ±5°C) and from ±2.5 to ±12.5% RH
• Temperature precise sensor: ±1.8°F (±1°C)
• Relative humidity precise sensor: ±3.5% RH
• Adjustable excessive cooling low temperature limit
• 120 V, 15 A, 2 HP load capacity
• CSA/UL compliant

Also available in iGS-040 version without external sensor.

Turns on an equipment if either temperature or relative humidity is too high.

Useful Tips

•  Plug a combination of inlet and exhaust 120 V fans to cool and dehumidify;

or

• Build up your cooling-dehumidifying capacity by plugging a sense cord from a switcher box like PLUG'n'GROW iLS4 in the iGS-040 outlet: 
  • an iLS4-120S on a 40 A circuit breaker will power 3 x 15,000 BTU air conditioners,

  • an iLS4-240 can power 2 x 3,750 W (240 V) air conditioners for about 5 Tons of refrigeration.

Control the temperature and humidity with highest priority and CO₂ enrichment

Plug a 120 V power strip in the outlet of the PLUG'n'GROW temperature and humidity controller (iGS-040) and plug the temperature and humidity equipment and the iLS120-OFF sense cord in the power strip. Plug the iLS120-OFF in a 120 V separate circuit and plug a CO₂ controller (iGS-061 or iGS-100) in the iLS120-OFF outlet and plug CO₂ enrichment device in CO₂ controller outlet.

For more information, contact us at 1-888-577-6274.

« Return to hygrostats