Information request

Contact us at 1-888-577-6274
or by filling out this short form.

Our brochures

Download our brochures to know more about the advantage of using our products.

iGS-RG1

CO₂ Regulator

Features

iGS-RG1 works with any CO₂ control device with a standard 110-120 Volt, 3 prongs outlet
For grow room 650 cubic feet and up to 7500 cubic feet
Features a heater to avoid regulator and valve freezing at high CO₂ flow
ASCO^TM*, North American made "continuous duty" industrial solenoid valve, 20 000 000 cycles life expectancy
CO₂ Flow up to 50 SCFH (Standard Cubic Feet per Hour), 2.5 - 3 times the maximum flow offered by competing products
Designed to last years and years and covered by a 3 year warranty
* ASCO^TM is the company that invented the solenoid valve back in 1910. Valves made by ASCO in North America are renowned for their long life and reliability and are mainly used in factories and industrial processes which require high reliability.

Useful Tips

For every 14 SCFH connect a 20 lbs compressed CO₂ tank.

CAUTION

Adjusting the CO₂ release pressure with the black knob thus bringing the needle to point in the red zone on the dial does not increase the CO₂ flow rate. It may cause the regulator to leak CO₂ from the pressure release orifice under the regulator.

If CO₂ leaks through the orifice under the regulator, it is not faulty. Just turn the black knob counter clockwise to bring back the needle to point in the green zone on the dial, between 0.2 and 0.3 MPa. To increase the CO₂ flow rate in cubic feet per hour, add a second and even a third 20 lbs bottle or even use a 50 lbs bottle. Remember that a 20 lbs CO₂ bottle cannot release more than 14 cubic feet of CO₂ per hour.

User Manual
(347 Ko)