iLS4-120

Load Switcher Box 120 V - 120 V

Features

• 120 V supply (connect to main electrical panel or 120 V high amperage circuit, up to 40 A breaker), four (4) 120 V outputs
• One 15 A circuit breaker per outlet
• Safely switches high amperage equipment with low cost timer or controller
• Incorporated 0 to 20 minutes adjustable ON delay
• Prevents hot bulb start-ups and sequentially turn on iLS4 load switcher boxes
• Electrical wiring between module and main panel not included
• CSA/UL compliant

Plug sense cord in a timer or controller: when its outlet turns on, iLS4 is activated.

Sequential lighting start-up

Light groups (4 x 1,000 W at a time, except for iLS4-120S) will turn ON at 2 minutes intervals. This technique reduces wear and tears on the electrical supply and allows for gradual night-time to daytime shifting in indoor grow rooms

Useful Tips

• Plug iLS4-120 sense cord in any PLUG'n'GROW controller outlet to control up to 4,000 W of 120 V equipments.
• To protect plants from lamps high temperature, plug an iGS-012 (PLUG'n'GROW High Temperature Watchdog) in your lighting timer (iGS-011L) and plug the iLS4-120 sense cord in the iGS-012 outlet. The iGS-012 will protect plants by turning off lighting plugged in iLS4-120 when temperature is too high. 
• Two iLS4-120 or iLS4-240 load switcher boxes may feed on the same circuit breaker (as shown below, except for iLS4-120S). See loading combinations below for iLS4-120.

Where to buy?

For more information, contact us at 1-888-577-6274.

« Return to electric distribution