iLS4-240

Load Switcher Box 240 V - 240 V

Features

• 240 V supply (connect to main electrical panel or any 240 V outlet connected to a breaker up to 40 A), four (4) 240 V outputs
• One 15 A circuit breaker per outlet
• Four (4) universal plug adapters included
• Safely switch high amperage equipment with low cost timer or controller
• Incorporated 0 to 20 minutes adjustable ON delay
• Prevent hot bulb start-ups and sequentially turn on iLS4 load switcher boxes
• Electrical wiring not included (3 wires cable and wiring to main panel suggested: use the cable gauge suggested in the previous page table)
• CSA/UL compliant

Plug sense cord in a timer or controller: when its outlet is activated, iLS4 switches ON.

Useful Tips

• Plug iLS4-240 sense cord in any PLUG'n'GROW controller outlet to control up to 8,000 W of 240 V equipments.
• To protect plants from lamps high temperature, plug an iGS-012 (PLUG'n'GROW High Temperature Watchdog) in your lighting timer (iGS-011L) and plug the iLS4-240 sense cord in the iGS-012 outlet. The iGS-012 will protect plants by turning off 240 V lighting plugged in iLS4-240 when temperature is too high. 
• Two iLS4-240 load switcher boxes may feed on the same circuit breaker.

Sequential lighting start-up

Light groups (4 x 1,000 W at a time, except for iLS4-120S) will turn ON at 2 minutes intervals. This technique reduces wear and tears on the electrical supply and allows for gradual night-time to daytime shifting in indoor grow room.

Where to buy?

For more information, contacts us at 1-888-577-6274.

« Return to electric distribution